Tag Archives: garage door operation

Image

Garage Door Safety

installation
You may not have given your garage door much thought lately. You press a button and it opens, another and it closes. Have you ever lost power to your door and had to open it by hand? Do you know how to do that?

Your garage door could be quite heavy. Older overhead doors were made entirely of wood. Newer doors are usually aluminum or fiberglass.

There will be a way to disconnect your overhead door from the opening apparatus so you can open it manually. This is usually a short cord and handle hanging from the track about half way to the door. pulling it disengages the door chain or cable and the door is then free to be raised.

Overhead door remote operation should be checked occasionally to ensure safe operation. The ‘electric eye’ operation to prevent door closure is fairly obvious. Recommended height for this beam is 4-6 inches off the floor. Too low and it may shine under your car and allow operation when you are only partially in the garage.

Less obvious is the automatic reversing feature required of overhead doors. This will reverse the door when it strikes an object while descending. This will not prevent damage or injury but will prevent entrapment of the object or person.

The Garage Door Manufacturers Association recommends testing the reverse function with a 2×4 laid across the door opening. Adjustment is usually a simple operation, consult the manufacturers manual for detailed specific information.
Children should be cautioned or forbidden as necessary to prevent dangerous overhead door operation.